| 槽型托辊的性能特点: |
| 添加时间：2019/11/4 14:58:15 浏览次数： |
| 槽型托辊的性能特点: Performance characteristics of trough idler: 1.槽型托辊具有耐腐蚀性特点:酸碱盐均对其难起腐蚀作用。 1. Groove type idler has corrosion resistance characteristics: acid and alkali salts are difficult to corrode it. 2.槽型托辊硬度强:耐磨性强。 2. The groove type idler has strong hardness and strong wear resistance. 3.密封性好:槽型托辊全密封，两端装有塑料迷宫密封圈，油滑油脂不会泄漏，可使滚动轴长期;槽型托辊处于全密封状态下运转。 3. Good sealing performance: the groove type idler is fully sealed, and both ends are equipped with plastic labyrinth seal rings. The oil and grease will not leak, which can make the rolling shaft run for a long time; the groove type idler is in full sealing state. 4.槽型托辊陶瓷表面:形成氧化膜，表面光滑，不粘附物料，与输送带接触摩擦系数小，降低了卷扬驱动力。 4. Ceramic surface of trough type idler: it forms oxide film, has smooth surface, does not adhere to materials, has small contact friction coefficient with conveyor belt, and reduces the driving force of winch. 5.槽型托辊使用寿命长:槽型托辊比钢托辊使用时间长2-5倍，且能减少皮带磨损，皮带不跑边，延长皮带使用寿命。 5. Long service life of trough type idler: the service life of trough type idler is 2-5 times longer than that of steel idler, and it can reduce belt wear, avoid belt edge running, and extend the service life of belt. 6.运营成本低:槽型托辊能降低皮带运输机的综合成本，减少维修工时。 6. Low operation cost: the trough type idler can reduce the comprehensive cost of the belt conveyor and reduce the maintenance time. 槽型托辊广泛用于露天粉尘较大，腐蚀性高的环境中、如矿山、电厂、钢厂、石料厂、水泥厂、洗煤厂、盐厂、碱厂、化肥厂、码头等所有运送场所经常使用槽型托辊。 Trough roller is widely used in open air environment with large dust and high corrosiveness, such as mines, power plants, steel plants, stone plants, cement plants, coal washing plants, salt plants, alkali plants, fertilizer plants, docks and other transportation sites. |
| 上一页 槽型托辊具有耐腐蚀性特点 |
| 下一页 槽型支架属于托辊支架的一种 |