网站转让 → 您的公司名称

托辊则安装在可偏转托辊支架的卡槽中，在可偏转托辊支架上设置有控制偏转角度的限位块。在支座或机身上设置有供可偏转托辊支架绕其转动的销轴，在拆下紧固件的情况下，可偏转托辊支架可以在限位块的控制下绕水平固定的销轴转动一定的角度。 槽型支架属于托辊支架的一种。采用先进的生产工艺，保证产品质量。槽型托辊清除皮带沾物，在斜坡皮带上送力大，阻力小，效果最佳。双节托辊，能减轻皮带在陶瓷托辊上的重形压力点，托辊中空装置能使带沾物自行掉落，不沾吸托辊，均能延长托辊使用期。
The supporting roller is installed in the clamping groove of the deflectable supporting roller bracket, and the deflecting angle limiting block is arranged on the deflectable supporting roller bracket. A pin shaft is arranged on the support or the machine body for the deflectable idler bracket to rotate around it. When the fastener is removed, the deflectable idler bracket can rotate a certain angle around the horizontally fixed pin shaft under the control of the limit block. The groove bracket belongs to one kind of roller bracket. Adopt advanced production technology to ensure product quality. The groove type idler can remove the dirt on the belt. It has the advantages of large force, small resistance and the best effect on the slope belt. The double section idler can reduce the heavy pressure point of the belt on the ceramic idler, and the hollow device of the idler can make the belt drop by itself without touching the suction idler, which can extend the service life of the idler.